

- Heavy-Duty Press
- Universal Press
- Knuckle (or Link) Drive Presses
- High-Speed Press (For Stator And Rotor)
- Hight-Speed Press Line (For HVAC Fin Producing)
- High-Speed Punch Press
- Hot-Die Forging
- Powder Forming Machine
- Fine Blanking Press
- Tel: +86-514-80362362
- E-mail: sales@yadon.com.cn
- High-rigidity H-type frame composed of separable crossbeam, uprights and basement;
- Six-point type, high-strength dynamic pressure crankshaft supporting;
- High-strength double eccentric crankshaft with good synchronization;
- High-precision8-side long guide rail;
- The hydraulic locking device for adjustment rods, ensuring the precision of bottom dead center;
- Hydraulic overload protection device;
- Forced automatic oil cycle lubrication system.
Standard configuration
- Main control circuit and console
- Combined pneumatic clutch
- Speed display (electronic control integration)
- Forward reverse device inverter
- Counter (electronic control integration)
- frequency converter
- Counter and batch settings
- Forced circulating lubricating system for circulating oil
- on the touch screen
- Mis-feeder detector interface
- human machine interface(HMI)
- Compressed air quick connector
- Electric die height adjustment device
- Automatic material lubrication device
- Digital display of die height
- Hydraulic lifting arms
- balance cylinder
- Die moving arms
Items |
YPH-160 |
YPH-200 |
YPH-300 |
YPH-400 |
YPH-550 |
YPH-630 |
|
Nominal Pressure |
KN |
1600 |
2000 |
3000 |
4000 |
5500 |
6300 |
Nominal Pressure Stroke |
mm |
3 |
3 |
3 |
3 |
2 |
2 |
Stroke of Slide |
mm |
30 |
30 |
30 |
40 |
50 |
50 |
Stroke |
S.P.M |
100~250 |
100~220 |
90~180 |
80~150 |
70~100 |
60~100 |
Max.Die Set Height |
mm |
400 |
450 |
500 |
550 |
580 |
600 |
Die Height Adjustment |
mm |
60 |
60 |
100 |
100 |
100 |
100 |
Bottom Size of Slide(L,R ×F,B) |
mm |
1500×700 |
1800×700 |
2300×800 |
2700×1100 |
3000×1200 |
3200×1300 |
Size of Table (L,R ×F,B) |
mm |
1500×900 |
1800×950 |
2300×1000 |
2700×1200 |
3000×1300 |
3200×1400 |
Side Opening |
mm |
500 |
550 |
600 |
700 |
800 |
800 |
Left and Right Column Spacing |
mm |
1550 |
1850 |
2350 |
2750 |
3050 |
3250 |
The Base of Blanking Holes (L,R ×F,B) |
mm |
1300×250 |
1600×300 |
2000×400 |
2300×480 |
2700×580 |
2900×600 |
The Maximum Weight of Upper Die |
Kg |
800 |
1100 |
1500 |
2000 |
2700 |
3000 |
Main Motor Power |
KW |
30 |
37 |
45 |
55 |
75 |
75 |